1.Calculate the mass percentage of benzene (C6H6) and carbon tetrachloride (CCl4) if 22 g of benzene is dissolved in 122 g of carbon tetrachloride.
Mass % of benzene
Mass% of carbon tetrachloride = 100 - 15.28 = 84.72%
1703 Views
Advertisement
Long Answer Type
2.
Calculate the mole fraction of benzene in solution containing 30% by mass in carbon tetrachloride.
897 Views
3.Calculate the molarity of each of the following solution (a) 30 g of Co(NO3)2.6H2O in 4.3 L solution (b) 30 mL of 0.5 MH2SO4 diluted to 500 mL.
844 Views
4.Calculate the mass of urea (NH2CONH2) required in making 2.5 kg 0.25 of molal aqueous solution.
1475 Views
Advertisement
5.
Calculate (a) molality (b) molarity and (c) mole fraction of KI if the density of 20% (mass/mass) aqueous KI is 1.202 g mL-1.
1010 Views
Short Answer Type
6.H2S, a toxic gas with rotten egg like smell, is used for the qualitative analysis. If the solubility of H2S in water at S.T.P. is 0.195 m, calculate Henry's law constant.
410 Views
7.Henry’s law constant for CO2 in water is 1.67 x 108 Pa at 298 K. Calculate the quantity of CO2 in 500 mL of soda water when packed under 2.5 atm CO2 pressure at 298 K.
479 Views
8.The vapour pressure of pure liquids A and B are 450 and 700 mm Hg at 350 K respectively. Find out the composition of the liquid mixture if total vapour pressure is 600 mm Hg. Also find the composition of the vapour phase.
223 Views
Advertisement
Long Answer Type
9.Vapour pressure of pure water at 298 K is 23.8 mm. 50 g of urea (NH2CONH2) is dissolved in 850 g of water. Calculate the vapour pressure of water for this solution and its relative lowering.
271 Views
10.Boiling point of water at 750 mm Hg 99.630C. How much sucrose is to be added to 500g of water such that it boils at 1000C.