If m is the mass of an electron and c is the speed of light, the ratio of the wavelength of a photon of energy E to that of the electron of the same energy is
The set which represents the isotope, isobar and isotone respectively is
(1H2, 1H3), (79Au197, 80Hg198) and (2He3, 1H2)
( 2He3, 1H1), (79Au197, 80Hg198) and (1H1, 1H3)
(2He3, 1H3), (1H2, 1H3) and ( 79Au197, 80Hg198)
(1H2, 1H3), (2He3, 1H3) and (79Au197, 80Hg198)
D.
(1H2, 1H3), (2He3, 1H3) and (79Au197, 80Hg198)
(i) Isotopes of an element are nuclides having same atomic number Z but different mass number A.
(ii) Nuclides having same mass number A but different atomic number Z are called isobars.
(ii) Nuclides with different atomic number Z and different mass number A but same neutron number are called isotones. Thus, for isotones N = (A- Z) is constant. Hence, option (d) is correct.
Two samples X and Y contain equal amount of radioactive substances. If th of the sample X and th of the sample Y, remain after 8 h, then the ratio of half periods of X and Y is
2 : 1
1 : 2
1 : 4
1 : 16
Radioactive is transformed into stable by emitting two γ-rays of energies
1.33 MeV and 1.17 MeV in succession
1.17 MeV and 1.33 MeV in succession
1.37 MeV and 1.13 MeV in succession
1.13 MeV and 1.37 MeV in succession
A pure semiconductor has equal electron and hole concentration of 1O16 m-3. Doping by indium increases nh to 5 x 1022 m-3. Then, the value of ne in the doped semiconductor is
106 /m3
1022 /m3
2 × 109 / m3
1019 /m3
The collector supply voltage is 6 V and the voltage drop across a resistor of 6OO Ω in the collector circuit is 0.6 V, in a transistor connected in common emitter mode. If the current gain is 20, the base current is
0.25 mA
0.05 mA
0.12 mA
0.02 mA
A full-wave rectifier circuit with an AC input is shown
The output voltage across RL is represented as
A carrier frequency of 1 MHz and peak value of 10 V is amplitude modulated with a signal frequency of 10 kHz with peak value of 0.5 V. Then the modulation index and the side band frequencies respectively are
0.05 and ± 0.010 MHz
0.5 and 1 ± 0.010 MHz
0.05 and 1 ± 0.005 MHz
0.5 and 1 ± 0.005 MHz
The maximum line-of-sight distance dM, between two antennas having heights hT and hR above the earth is
The frequency band used in the downlink of satellite communication is
9.5 to 2.5 GHz
896 to 901 MHz
3.7 to 4.2 GHz
840 to 935 MHz