The physical quantity that does not have the dimensional formula [ML-1T-2] is
force
pressure
stress
modulus of elasticity
A dorce F is applied onto a square plate of side L. If the percentage error in determining L is 2 % and that in F is 4 %, the permissible percentage error in determining the pressure is
2 %
4 %
6 %
8 %
From a balloon moving upwards with a velocity of12 ms-1, a packet is released when it is at a height of 65 m from the ground. The time taken by it to reach the ground is (take, g = 10 ms-2)
5 s
8 s
4 s
7 s
A bus is moving with a velocity of 10 ms-1 on a straight road. A scootorist wishes to overtake the bus in one minute. If the bus is at a distance of 1.2 km ahead, then the velocity with which he has to chase the bus is
20 ms-1
25 ms-1
30 ms-1
40 ms-1
If the displacement of a body varies as the square of elapsed time, then its
velocity is constant
velocity varies non-uniformly
acceleration is constant
acceleration changes continuously
The magnitudes of a set of 3 vectors are given below. The set of vectors for which the resultant cannot be zero is
15, 20, 30
20, 20, 30
10, 20, 40
10, 10, 20
A ball dropped from a point A falls down vertically to C, through the mid-point B. The descending time from A to B and that from A to C are in the ratio
1 : 1
1 : 2
1 : 3
A cricket ball is hit at an angle of 30° to the horizontal with a kinetic energy E. Its kinetic energy when it reaches the highest point is
0
If n bullets each of mass m are fired with a velocity v per second from a machine gun, the force required to hold the gun in position is
(n + 1) mv
mnv
n2mv
The time required to stop a car of mass 800 kg, moving at a speed of 20ms-1 over a distance of 25 m is
2 s
2.5 s
4 s
4.5 s
B.
2.5 s
Given, u = 0 ms-1 , v = 20 ms-1
Mass of car = 800 Kg , s = 25 m
We know that, distance covered,