(i) An a.c. source of voltage V = Vo sin ωt is connected to a series combination of L, C and R. Use the phasor diagram to obtain an expression for impedance of a circuit and the phase angle between voltage and current. Find the condition when current will be in phase with the voltage. What is the circuit in this condition called?
ii) In a series LR circuit, XL = R and the power factor of the circuit is P1. When capacitor with capacitance C, such that XL = XC is put in series, the power factor becomes P2. Calculate P1 / P2.
(i) Write the function of a transformer. State its principle of working with the help of a diagram. Mention various energy losses in this device.
(ii) The primary coil of an ideal step-up transformer has 100 turns and the transformation ratio is also 100. The input voltage and power are 220 V and 1100 W, respectively. Calculate the:
a) number of turns in secondary
b) current in primary
c) voltage across secondary
d) current in secondary
e) power in secondary
i) A transformer is a device that changes a low alternating voltage into a high alternating voltage or vice versa.
Transformer works on the principle of mutual induction.
A changing alternate current in primary coil produces a changing magnetic field, which induces a changing alternating current in secondary coil.
Energy losses in transformer:
Flux leakage due to poor structure of the core and air gaps in the core.
Loss of energy due to heat produced by the resistance of the windings.
Eddy currents due to alternating magnetic flux in the iron core, which leads to loss due to heating.
Hysteresis, frequent and periodic magnetisation and demagnetization of the core, leading to loss of energy due to heat.
ii)
a) Number of turns in secondary coil is given by,
b) Current in primary is given by,
(i) Define the term drift velocity.
(ii) On the basis of electron drift, derive an expression for resistivity of a conductor in terms of number density of free electrons and relaxation time. On what factors does resistivity of a conductor depend?
(iii) Why alloys like constantan and manganin are used for making standard resistors?